论文标题
最大化光子捕获超快速硅光电探测器的吸收
Maximizing absorption in photon trapping ultra-fast silicon photodetectors
论文作者
论文摘要
在具有高速和高灵敏度的近红外波长下运行的硅光电探测器对于新兴应用(例如光检测和范围系统(LIDAR),量子通信和医学成像)变得至关重要。但是,此类光电探测器在那些限制其实施的波长处呈现带宽吸收的权衡。光子陷阱结构通过增强光线的相互作用来解决这一权衡,但是由于影响其设计和制造的许多因素,使其性能最大化仍然是一个挑战。在本文中,研究了提高操作速度的同时提高光子捕获效果的策略。通过优化光子捕获结构的设计并实验将它们集成到高速光电探测器中,同时宽带吸收效率提高了最高1000%,并且已经实现了超过50%的电容降低。此类工作还允许提出经验方程,以将光电探测器的量子效率与光子捕集结构,材料特征和制造技术的局限性的物理特性相关联。结果获得了,开放的途径是设计成本效益的CMO集成的。
Silicon photodetectors operating at near-infrared wavelengths with high-speed and high sensitivity are becoming critical for emerging applications, such as Light Detection and Ranging Systems (LIDAR), quantum communications, and medical imaging. However, such photodetectors present a bandwidth-absorption trade-off at those wavelengths that have limited their implementation. Photon trapping structures address this trade-off by enhancing the light-matter interactions, but maximizing their performance remains a challenge due to a multitude of factors influencing their design and fabrication. In this paper, strategies to improve the photon trapping effect while enhancing the speed of operation are investigated. By optimizing the design of photon trapping structures and experimentally integrated them in high-speed photodetectors, a simultaneous broadband absorption efficiency enhancement up to 1000% and a capacitance reduction of more than 50% has been achieved. Such work also allows to present empirical equations to correlate the quantum efficiency of photodetectors with the physical properties of the photon-trapping structures, material characteristics, and limitations of the fabrication technologies. The results obtained, open routes towards designing cost-effective CMOS integrated.