论文标题
通过基于边界层温度变化的风速修改来改善波观察III输出
Improvement of Wavewatch III output through a wind speed modification based in boundary layer temperature variability
论文作者
论文摘要
我们在这里提出了一种经验方法，旨在减少通过波表模型计算出的显着波高度的误差。这些误差计算为模型和局部观察到的测量之间的差异。我们假设，如果模型使用了良好的校准方法来解释表面边界层内的热变化，则将减少此误差。然后，我们将2015年的错误与空气温度差进行了比较，以便找到它们之间的潜在关系。进行的统计分析表明，这些变量之间存在明显的相关性，这暗示着需要基于误差与空气差异之间的线性关系引入稳定性的校正。
We present here an empirical method aimed at decreasing the error in the significant wave height calculated through the Wave Watch model. The errors are calculated as the difference between the modeled and the locally observed measurement. We hypothesize that this error would be reduced if the model used a well calibrated method to account for thermal variations within the surface boundary layer. We compared then this error for 2015 to the air sea temperature difference in order to find a potential relationship among them. The statistical analysis performed show a clear correlation between these variables, hinting for the need of introducing a correction for stability based on a linear relationship between the error and the air ocean temperature difference.
