BS EN ISO 30013:2011 BSl Standards Publication Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (IsO 30013:2011) bsi. ..making excellence a habit. BS ENISO30013:2011 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO 30013:2011. It supersedes BS EN ISO 11758:1997 and BS EN ISO 8580:1995 which are withdrawn. The UK participation in its preparation was entrusted to Technical Committee PRI/66/-/4, Rubber and plastics tubing, hoses and hose assemblies - Methods of test. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. @ BSI 2011 ISBN9780580617256 ICS 23.040.70 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2011 Amendments issued sincepublication Date Text affected EUROPEANSTANDARD ENISO30013 NORMEEUROPEENNE EUROPAISCHENORM October 2011 ICS23.040.70 Supersedes EN ISO11758:1997,EN ISO8580:1995 English Version Rubberandplasticshoses-Methodsofexposuretolaboratory light sources - Determination of changes in colour, appearance andotherphysicalproperties(lSO30013:2011) Tuyaux en caoutchouc et en plastique - Methodes Gummi- und Kunststoffschlauche - Verfahren zur d'exposition a des sources lumineuses de laboratoire - Bestrahlung mit Laborlichtquellen - Bestimmung der Determination du changement de coloration, d'aspect et Anderungen von Farbe, Aussehen und anderen d'autres proprietes physiques (ISO 30013:2011) physikalischen Eigenschaften (ISO 30013:2011) CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concermning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, cen EUROPEAN COMMITTEE FOR STANDARDIZATION COMITE EUROPEEN DE NORMALISATION EUROPAISCHES KOMITEEFOR NORMUNG Management Centre:Avenue Marnix 17,B-1000 Brussels @2011CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 30013:2011: E worldwide for CEN national Members. BSENISO30013:2011 ENISO30013:2011(E) Foreword This document (EN ISO 30013:2011)has been prepared byTechnical Committee ISO/TC 45"Rubber and rubber products”in collaboration with Technical Committee CEN/TC 218“Rubber and plastics hoses and hose assemblies" the secretariat of which is held by BSl. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2012, and conflicting national standards shall be withdrawn at the latest by April 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries areboundto implementthisEuropean Standard:Austria,Belgium,Bulgaria,Croatia,Cyprus,Czech Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal